High dehumidification performance even at low temperatures at 5 °C
Maximum dust and dampness protection for all electrical components
Very easy to maintain construction
Optimal handling with a very strong handle
Portable and easily stored anywhere thanks to its rotary compressor
Practical stacking groove for stable, space-saving storage and transport
Stackable with equally dimensioned models
Tried and tested German industrial design – protected prototype
55 litres at 26.7 degrees and 60% relative humidity
24 litres at 20 degrees and 60% relative humidity
12 litres at 10 degrees and 60% relative humidity
Includes pump out with a 10m clear hose
The new value-for-money leader in the 65-litre class Reduce high levels of relative humidity in minimum time or easily keep large rooms dry – the TTK 500 is in its element, this is what it was made for.
This becomes possible because of a clever combination of a strong rotary compressor and a quality fan for airflow rates of up to 1,000 m³/h.
Thanks to the high air circulation, the tuned heat exchange system is always able to feed extreme humidity from the ambient air for quick drying. Up to 70 litres of humidity can be removed from the room air per day with just one TTK 500 in this manner.
At the same time, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 500 guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no dehumidification occurs.
Common location changes and use in rough construction site conditions are no problem for this condenser dryer: Thanks to the ergonomic construction and carriage design with a changeable fixed strong bar handle and large wheels, the TTK 500 can easily be transported over uneven terrain or up and down stairs – the rotary compressor makes it possible to transport it anywhere. And the non-marking rubber wheels leave no marks on your floorboards or other sensitive undergrounds.
A special enclosure protects the electronic components of the dehumidifier from hazardous dust or moisture, which can interfere with the functionality and durability of the electronics.
The enclosure is in no way inferior to the impressive inner values: All components of the TTK 500 are reliably protected and attractively combined in the tried and tested German industrial design – protected prototype.
Even in storage, the TTK 500 makes a good impression – while taking up surprisingly little space. Due to its two practical stacking grooves on top, equally sized TTK‑S devices can be safely stacked to save space during transport and storage.
A one dial control for ease of use
A fixed handle that can be used in 2 different ways
The serial operating hours counter of the TTK 500 commercial dehumidifier is optionally available as a dual counter for operating and kilowatt-hours.
A special enclosure reliably protects the TTK 500 dehumidifier electronics from dangerous inclusions.
Two stacking grooves make it possible to stably stack equally sized TTK‑S commercial dehumidifiers to save space.
A powerful condensate pump with a pump performance of up to 50 m distance and a maximum pump height of 4 m is also available for permanent drying with the TTK 500.
This can be used to permanently drain condensation from whole stories of buildings.